The technical regulation stipulates that conformity assessment may be performed by, or that a participant may be:

1) the manufacturer;
2) a designated conformity assessment body (hereinafter: the Designated body);

3) a Public administration body (hereinafter referred to as: the competent body). 

​

Before the placing the product on the market or in use, the product which conforms to technical regulation requirements shall be marked with the mark of conformity, if the technical regulation so stipulates.

 

Marks of conformity are:
1) Serbian Mark of conformity (hereinafter: Serbian mark);

2) CE marking;

3) Other marks of conformity, in accordance with specific regulations (i.e. “E” mark - homologation). 

​

The Serbian mark shall be the only mark confirming that the product to be placed on the market or in use in the Republic of Serbia conforms to Serbian technical regulation requirements, if such regulation requires affixing said mark.

​

The Serbian mark consists of three capital letters “A” interconnected in the shape of an equilateral triangle (3A).

​

Size of the mark shall be determined by the height of the mark for obligatory conformance shown in Annex 1.

​

The height of the mark may only have values of standard numbers rounded up, to the order of magnitude R10 expressed in millimetres (mm), as per

Serbian standard – Standard numbers, numerical values and definitions – SRPS A.A0.001.

 

The height of the mark shall be, as a rule, at least five millimetres.

 

The identification number of the Designated, or Authorized body from the Register of designated or authorized bodies for conformity assessment, and the last two digits of the year of issue of the conformity certificate, if this body performed, or participated in, conformity assessment, shall be placed next to the Serbian mark.

 

The shape, appearance and contents of the Serbian mark are enclosed as Annex 2, printed with this Regulation and its integral part. 

​​

The CE marking is the only mark which confirms conformity of the product with requirements stipulated by technical regulation which prescribe its affixation.

 

The CE marking consists of initials “CE".

 

The identification number of the Designated or Authorized body which has been notified to the European Commission, if this body performed, or participated in conformity assessment, shall be placed next to the CE marking.

 

The shape, appearance and contents of CE marking are enclosed as Annex 3, printed with this Regulation and its integral part.